Smart Panel IGM
Up to twelve Liebert units over the RS-422 IGM wiring you already have. A full DM inside.
Wall-mount panels that monitor, control and annunciate the equipment in the room, from a full DM in an enclosure to a simple LED status panel.
Smart Panels run the same DM software as the rack server, so you get the console, alarms, trends and BMS integration in an enclosure that mounts on the wall of the room it watches.
Up to twelve Liebert units over the RS-422 IGM wiring you already have. A full DM inside.
Automatic changeover, failover and temperature staging for up to four CRAC units, RTUs or pumps.
The DM platform in a wall-mount enclosure, for electrical rooms, closets and sites with no server rack. Cellular and Starlink options.
Remote Status Panels show the condition of critical equipment and leak zones on LEDs, with an alarm you can hear, in a control room, hallway or office away from the equipment itself.
Six UPS conditions on LEDs, with an alarm you can hear, up to 1,000 feet from the UPS.
Six dry-contact inputs from any equipment, each with an LED and label, a buzzer and a summary alarm relay.
Six leak zones with LEDs, labels and relays, plus built-in 24 VAC or 24 VDC power for the detectors.
Add network temperature and humidity readings, extra inputs and outputs for equipment with no network port, and leak detectors for the Remote Leak Detection Panel.
Temperature and humidity on the network, with HTTP and JSON outputs. The TH1C adds a dry-contact input for a leak detector or other contact.
22 universal inputs (CM03A), or 8 inputs with relays and analog outputs (CM04A), over Modbus or BACnet.
Point and sensing-rope detectors that the Remote Leak Detection Panel can power.